sparepart

The DSP Bar Tape screw-in plug is now available as a separate accessory! Replace old plugs or mix and match colors as desired.

Why We Make This

We’ve been making hubs a long time, and our hubs last a long time, so we provide the tools you need to service them, even if a lot of you have never worked on a hub with an adjustment cone.

Why We Make This

It’s all well and good to make a thing that lasts a lifetime. You also have to give your riders the tools they need to do the easy service work that will make that lifetime a reality.

Devolution baseplates allow you to use Chris King headsets designed for larger diameter steerer tubes on forks with smaller diameter steerer tubes.

Devolution baseplates are NOT compatible with DropSet™ headsets.

Original replacement O-Ring for Chris King R45 driveshells.

Servicing your Chris King hub regularly will make it perform its best.

Original replacement O-Ring for all Chris King driveshells including R45 Shimano. Not compatible with Campagnolo.

Servicing your Chris King hub regularly will make it perform its best.

This is where the bees live, the heart of the Chris King RingDrive. These parts are compatible with ISO, Classic, Tandem, Single Speed, Uni-Disc, and BMX hubs.

Adjustment clamps are used to adjust bearing preload on Chris King hubs.

• Includes one High Profile (HP) Adjustment Clamp
• Fits all Chris King ISO/Disc Rear Hubs

ISO AB and Boost 6-Bolt axles, axle ends, and adjustment clamps.

• PHB781B 110mm x 15mm Axle End

Chris King hub adjusting cone is used to adjust preload on ISO QR front, Classic, and Tandem hubs.

For all Chris King Front R45 Hubs

Servicing your Chris King hub regularly will make it perform its best.

R45 Driveshells are compatible with R45, R45D, and R45D Centerlock rear hubs. Driveshells are available bare without internals or complete, ready to be lubed and installed.

This driveshell will only work with an R45/R45D hub equipped with a Gen 2 "twin-bearing" axle.

Original spare part for your Darimo T1 & T2 carbon seat post.

Technical Specifications:

• Material: Carbon
• Compatibility: Darimo T1 and T2 carbon seat post
• Color: 3K Carbon, Black

Genuine spare part for your Darimo T1 carbon seat post. This barrel nut is designed to be used on your Darimo carbon seatpost with the Loop tensioning system.

Original aluminum yoke for your Darimo T2 carbon seat post with offset.

DARIMO STEM NUT A (ROUND)

• Technical Specifications:
• Length: 11 cm
• Diameter: 8 cm
• Color: Black

DARIMO STEM NUT B (CURVY)

• Technical Specifications:
• Length: 11 cm
• Diameter: 8 cm
• Color: Black

Genuine spare part for your Darimo T1 carbon seat post. This barrel nut is designed to be used on your Darimo carbon seatpost with the normal carbon yokes.

DARIMO SEATPOST BOLT T1
Original spare part for your Darimo T1 carbon seat post. The screws are needed to mount and align your saddle on the T1 seat post with the yokes / loops and the carbon rocker.