MUC-OFF Frame Protection Kit @ E-MTB

MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB
MUC-OFF Frame Protection Kit @ E-MTB

MUC-OFF Frame Protection Kit @ E-MTB

RM306.00

RM340.00

Sale

Quantity: 20

Select variant(s): Design
Design

Quantity:


Scratches and stone chips on your pride and joy? Hell no! Get protected with the Muc-Off Bike Protection Series.

Designed for MTB and EMTBs, our clear Frame Protection Kit is made up of multiple universally designed shapes and sizes to cover all the high-risk areas on your bike.

Made using a TPU (Thermoplastic Polyurethane) material, the Frame Protection Kit forms a barrier around your bike that’s strong enough to withstand the gnarliest of impacts, whilst being flexible enough to fit pretty much any frame geometry.

The kit is stain-resistant, non-yellowing, and self-healing, meaning you simply apply warm water to any light scratches or scuffs, to buff them out of the protective film.

The 45 pieces contained within the kits are backed with ultra-strong self-adhesive backing, which means they’re super easy to install and will stay firmly in place whatever the conditions – So you can focus on keeping it pinned!

HOW TO
  1. Clean your bike thoroughly before application. For best results and optimum durability spray Muc-Off Disc Brake Cleaner or Dry Degreaser onto a clean, dry microfibre cloth and wipe over the surface to ensure it is contaminant free. (Always test the disc brake/dry degreaser cleaner on a small inconspicuous area prior to use to ensure finish compatibility!)
  2. Try to fit the guards in a clean and warm environment, this will help achieve good adhesion to the surface. Top Tip! If you are applying in colder conditions and have access to a hairdryer then carefully warm the surface. This will help achieve an optimal adhesive bond.
  3. Spray your hands and the adhesive side of the guards with water then slowly peel the guards off the backing material and line up the centre of the guards to the area you are applying. NB: It’s important you start with each sticker in the dead centre of the area you are applying so chill and take your time on this section! Then slowly rub down the middle, working your way out to the sides pushing out any air bubbles to the edges.

 

Untitled